The entire series comes standard with rear wheel steering, and the price of the HiPhi Y starts at 339000 yuan

On the evening of July 15th, Gaohe HiPhi Y was officially released, marking the brand's third mass-produced model after HiPhi X and HiPhi Z, positioned as a technology luxury mid to large-sized SUV. Due to the relatively high prices of previous models, Gaohe surprisingly set the price of HiPhi Y between 339000 yuan and 44900 yuan, even much lower than the pre-sale price, which is surprising.

As the lowest priced model of the HiPhi Y brand at present, the HiPhi Y series comes standard with a rear wheel steering system, and the entire series comes standard with dual chips of Qualcomm 8155 and Qualcomm QCS8250. The selling point is distinct among the same price range.

HiPhi Y comes in two power versions, with a dual motor four-wheel drive version equipped with a maximum 247kw motor on the front axle, a peak power of 124kw on the rear axle, a combined maximum power of 371kw, a combined maximum torque of 620N · m, and a 0-100km/h acceleration of 4.7s. The single motor version is equipped with a rear axle 247kw motor, with a maximum torque of 410N · m and an acceleration of 6.8s from 0-100km/h.

It is equipped with 115kWh CATL Ternary Lithium Battery version and 76.6kWh blade battery version. The 115kWh battery version has a single motor version with a CLTC range of 810km, while the dual motor version has a CLTC range of 765km.

The three models of HiPhi X/Y/Z adopt a front double wishbone+rear five link suspension structure, all equipped with CDC continuous variable damping dampers, full speed active rear wheel steering, and chassis integrated control. The entire series is equipped with full speed range active rear wheel steering as standard, with a maximum steering angle of ± 5.4 degrees and a minimum turning radius of 5.6 meters.

Its body size is 4938 × one thousand nine hundred and fifty-eight × 1658mm, wheelbase 2950mm. The front row has 1053mm headroom and 1059mm legroom; The headroom of the two rear seats is 1048mm, and the headroom of the middle rear seat is 955mm; The length of the rear seat cushion reaches 518mm, while the legroom in the rear seats reaches 1012mm. Overall, as a mid to large SUV, the space performance of the HiPhi Y is good.

High strength steel, aluminum alloy, Magnalium and other materials are used in the body in white, of which high strength steel accounts for 34% and aluminum alloy accounts for 53%. The top pressure bearing capacity of the whole vehicle reaches 110000N. High performance in terms of lightweight body and safety of white body.

The exterior design is quite unique, with a strong sense of technology. Through optimization such as side deflectors, suspended guide fins, slanted suspended lower air outlets, frameless anti glare exterior mirrors, and wide low drag wheels, the drag coefficient is 0.24Cd, which is considered very low in medium to large SUVs.

HiPhi Y offers a total of 6 body colors to choose from, including purple, silver, red, gray, green, and white, paired with liquid metal textured paint or flowing pearlescent paint.

HiPhi Y is equipped with a 12.3-inch high-definition LCD instrument cluster, a 17-inch OLED 3K resolution screen, and a 15-inch 2K resolution front passenger screen. The entire series is equipped with dual chips of Qualcomm 8155 and Qualcomm QCS8250 as standard. The HUD head up display has a projection area of up to 22.9 inches. The entire series comes standard with a 9.2-inch streaming interior rearview mirror that supports angle, viewing angle width, and display brightness adjustment.

The high-end model is equipped with 32 intelligent hardware, including 1 LiDAR+5 millimeter wave radars+12 ultrasonic radars+3 front view cameras+1 rear detection camera+4 lateral detection cameras+1 DMS camera+4 surround view cameras+1 steering wheel release monitoring sensor. Among them, the Hesai 128 line LiDAR has a detection distance of 180m and a detection angle of 120 °.